Polypropylene Material Safety Data Sheet
 
PHYSICAL AND CHEMICAL PROPERTIES
Melting Point: 160°C
Vapor Pressure: N/A
Vapor Density: N/A
Solubility in Water: Not Soluble
Ph: N/A
Specific Gravity: 0.90
% Volatile By Volume: N/A
Appearance and Odor: Granular appearance, slight to no odor.
 
FIRE AND EXPLOSION HAZARDS
Flashpoint: 400°C
Auto Ignition Temperature: N/A
Flammable Limits (STP): N/A
Extinguishing Media: Use water fog, dry chemicals or CO2
Special Fire Fighting Protective Equipment: Firefighters should be equipped with self-contained breathing apparatus
Unusual Fire and Explosion Hazards: Molten plastics, dust can cause explosion hazards.
 
STABILITY AND REACTIVITY
Stability: Stable
Incompatibility: N/A
Hazardous Decomposition Products: CO2 , Carbon Monoxide
Hazardous Polymerization: Will not occur
 
HEALTH HAZARD IDENTIFICATION
General: Toxicity information is not available for this composite. The health hazard assessment is based on information available for the components involved in the composite.
Inhalation: Dust from product can cause irritation of the respiratory system. See precautions and personal protection (section 8 for more information) people with sensitive respiratory systems should wear respirators.
Other Effects of Overexposure: None known
Material % TLV PEL
Polypropylene 100 N/A N/A
Product Name: Polypropylene
Synonyms: Polypro / Polypropylene
 
FIRST AID PROCEDURES
Skin: Wash with cool water and treat for thermal burns. Do not peel off plastic from skin, but get medical treatment quickly.
Eyes: Flush with water for 15 minutes. If irritation persists, get medical attention.
Inhalation: Get to fresh air quickly.
 
DISPOSAL CONSIDERATIONS / PERSONAL PROTECTION
Disposal Method: Dispose of in Local, State or Federally approved landfill for such materials.
Spills: Sweep, vacuum or shovel into a drum for disposal or reuse. No special precautions are needed.
 
EXPOSURE CONTROL / PERSONAL PROTECTION
Ventilation: Local exhaust
Respiratory: Standard MSHA / NIOSH approved respirator for dust and vapors.
Other protective equipment: Gloves, heat resistant shoes, clothing and safety glasses are recommended.
 
SPECIAL PRECAUTIONS
None Needed
 

Disclaimer: The information herein is given in good faith but no warranty, expressed or implied is made.
 
 
MEDICAL | BIOSAFE | PHARMACEUTICAL | SEMICONDUCTOR | LABORATORY | SURGIGAL | GOVERNMENT | CLEANROOM | PASS THRU WINDOW | 12x12x12 PASS THROUGH | LABORATORY PASS THROUGH | 12x12x18 PASS THRU | SURGICAL PASS THROUGH | 18x18x18 LAB PASS | MEDICAL PASS THROUGH | 18x18x24 AVOID CROSS CONTAMINATION | TYPE 304 STAINLESS PASS THROUGH | 24x24x16 STEEL PASS THRU | TYPE 316 STAINLESS PASS THROUGH | 24x36x24 SURGICAL PASS THROUGHS | CLEANROOM PASS THROUGH | 24x24x36 PASS THROUGH | FLOOR MOUNT PASS THROUGH | 24x24x48 PASS THRUS | FIRE RATED PASS THROUGH | 36x36x36 SS PT | VENTILATED PASS THROUGH | 48x48x48 | POLYPROPYLENE PASS THROUGH | CUSTOM DIMENSIONS | ACRYLIC PASS THROUGH | 20x24x30 PASS THRUS | STATIC DISSIPATIVE PASS THRU | PASS THROUGH 12X24X36 | NON-CONDUCTIVE LAMINATE PT | POWDER COATED PASS THROUGH | WALK THROUGH PASS THROUGH | WALK THROUGH PT WITH ROLLERS | AIR CONDITIONED PASS THROUGH | ELECTROPOLISHED PASS THROUGH | INDUSTRIAL PASS THROUGH | 48x48x48 STAINLESS | CUSTOM DESIGNED PASS THROUGH | STAINLESS CASEWORK | STAINLESS STEEL CASEWORK |